HR + 385 (0)1 2499 515 / RS + 381 (0)11 630 47 65 / BIH +387 (0) 33 776 350

 

Rubber hoses

 

Rubber hoses to the highest standards

 

Flexible rubber pipes from our range meet the highest standards such as RMA Steel mandrel, ISO 1307, SAE J1527, en 559, en 1327, UNI 4414 and F.D.A. Food standard. Rubber pipes have wide application and are used to transport various media such as water, air, chemicals, steam and hot water, milk, fats, liquids with lower alcohol content, fuel, oil, gas, sand, mortar and concrete.

Depending on the purpose of rubber flexible pipes, they are resistant to abrasions, ozone, weather conditions, physiological solutions, UV rays, oil and steam, welding, combustion and high temperature (silicone tubes). Applications found in industry, construction, agriculture, laboratories, medical technology, etc.

We deliver them in reinforced variants. Reinforced with textile inserts and/or steel spiral or copper wire.

Offer:

Rubber pipes for water and air

 

Water and air Pipe 10 bar

Water and air pressure for general use. The inner layer of the SBR black tyre is reinforced by highly expansible textile inserts.

Diameter: from fi 4-20 mm.

Security factor: 3:1

Temperature range of Use:-30 to + 80 °c

Standard: RMA STEEL mandrel

Water pipe and Air 10 bar | Mandrino

Water and air pressure, massive constructions, is recommended for use in industry, agriculture and construction sites. The inner layer of the SBR black tyre is reinforced by highly expansible textile inserts.

Diameter: from fi 13-60 mm.

Security factor: 3:1

Temperature range of Use:-30 to + 80 °c

Standard: RMA STEEL mandrel

 

Pipe Suction 10 Bar | Ribbed

Suction and water supply and liquids, for pouring, tanks. The inner layer is made of smooth rubber, and the outer layer is rib and flat sequels at the ends. Resistant to abrasion, ozone and weatherproof. Reinforced by highly expansible textile inserts and steel spiral.

Diameter: from fi 25-305 mm

Security factor: 3:1

Temperature range of Use:-30 to + 80 °c

Standard: RMA STEEL mandrel

 

20 Bar Compressed Air pipe

Compressed air pressure for general industrial use, with oil and steam resistant internal layer (tubes). The inner layer is resistant to abrasion, ozone and weather conditions, reinforced by highly expansive textile inserts.

Diameter: from fi 5-16 mm.

Security factor: 3:1

Temperature range of Use:-30 to + 80 °c

Standard: ISO 1307

 

Compressed air Pipe 20 Bar | Mandrino

Potis compressed air in the mining industry, on construction sites,

In civil engineering, it is recommended for demanding working conditions, with internal layer SBR + NBR black, oil and steam resistant. Outer layer SBR, black, abrasion resistant, ozone and weather conditions, reinforced with textile inserts of exceptional strength.

Diameter: from fi 13-102 mm.

Security factor: 3:1

Temperature range of Use:-30 to + 80 °c

Standard: RMA STEEL mandrel

 

Rubber pipes for acids and chemicals

 

tube for acids and chemicals

Potis acid and chemicals. Inner and outer layer of EPDM tube, black. Additional reinforcement of highly stretgible textile inserts.

Diameter: from fi 13-51 mm.

Security factor: 3:1

Temperature range of use:-40 ° C to + 110 °c

Standard: RMA STEEL mandrel

 

Rubber pipes for hot water and steam

Hot-water pipe and steam 10 bar

Potis of hot water, anticorrosive liquids and steam maximum temperatures 120 °c, for use in the thermo-sanitary industry, flushing of fatty stains

etc. Internal outer layer pipe of EPDM, black, abrasion resistant, ozone and weather conditions, reinforced with highly expansive textile inserts.

Diameter: from fi 13-60 mm.

Security factor: 3:1

Temperature range of use:-40 to + 120 ° C

Standard: RMA STEEL mandrel

 

Steam Hose 7 Bar

It is recommended for the saturated steam flow with maximum pressure of 7 bar (164 °c), used for sterilization of installation and cleaning in general.

internal and outer layer of EPDM, black, abrasion resistant, ozone and weather conditions, reinforced with highly expansible textile inserts.

Diameter: from fi 13-63 mm.

Security factor: 10:1 (O13-O19), 8:1 (O25-O63)

Temperature range of use:-40 to + 164 ° C

Standard: RMA STEEL mandrel

 

Milk Pipes

Milk Pipes

Rubber pipe for use in food industry, transport of plant and animal fats, liquids with low alcohol content, milk and nutritional ingredients containing fat. Available in a suppressed or suction-suppressed version. Interior of the pipe white food tyre, smooth, airtight for the smell and taste of the transported medium. Absolutely atoxic. Sheath of smooth synthetic rubber with textile print, resistant to abrasion, oil, weathering and ozone. Reinforced with textile inserts, and in the suction-suppressed version and steel spiral.

Diameter: from fi 19-102 mm.

Security factor: 1:4

Temperature range of use:-20 °c to + 90 °c, for sterilization of up to + 120 °c max. 30 minutes.

Standard: Food according to European standard F.D.A. Standard.

 

Rubber pipes for fuel and oil

 

Fuel and oil Pipe 10 bar

 

The emphasis of hydro carbonate, common and ecological fuels, oil-based products up to 50% of aromatic ingredients, is used to charge and discharge (transfusion) tanks in tanks for petrol and refineries. Interior Tubes NBR + PVC, black, resistant to the usual and ecological fuels and oil-based products, outer layer NBR + PVC, black, fuel resistant, oil-based products, abrasion, ozone and weather conditions, reinforced with textile inserts and copper wire spiral.

Diameter: from fi 13-80 mm.

Security factor: 3:1

Temperature range of use:-20 °c to + 100 ° C

Standard: RMA STEEL mandrel

 

Rebrasta pipe for fuel and oil, suction thrust

 

USIS and Potis Hydro carbonate, fuel, oil based products up to 50% of aromatic ingredients, used to discharge (transfusion) tanks; The pipe with the sequin. Inner layer NBR + PVC, black, fuel resistant, oil. Outer layer CR, black, wavy, highly flexible, fuel resistant, abrasion, ozone and weather conditions. Additionally reinforced: Textile inserts, copper wire spiral.

Diameter: from fi 25-254 mm.

Security factor: 3:1

Temperature range of use:-20 °c to + 100 ° C

Norma: SAE J1527-RMA STEEL mandrel

 

Welding pipes

 

Welding pipes

 

Application for oxygen (blue covering) or acetylene (red covering) for gas welding of metals and for various technical applications. Interior of the pipe synthetic rubber, black, resistant to gas welding, high combustion resistance. Outer layer synthetic rubber, blue or red, resistant to aging, abrasion, ozone, weather conditions and to the touch with hot metal particles. Reinforced with highly expansible textile inserts.

Diameter: from fi 5-19 mm.

Security factor: 3:1

Temperature range of use:-30 ° to + 80 °c

Standard: EN 559:1994; ISO 1307

 

Pipes for Autogenic Welding Binato

 

Welding tube, reinforced with high strength polyester, for oxygen flow and acetylene. Manufactured according to EN1327, UNI4414 standards. Very flexible and light. Extreme resistance to weather influences and aging. Working pressure 20 bar.

Security factor: 3:1

Temperature range of use:-15 ° C to + 60 °c

Standard: EN 1327, UNI 4414

 

Rubber Pipes for sandblasting

 

20 Bar Sandblasting Pipe

 

For the installation of sandblasting, compressed air flow with sand, metals particles and generally abrasive materials. Used for demanding working conditions and high pressure work. Internal Tube NR, black, abrasive resistant, maximum 75 mm3/cm2. Outer layer SBR/NR, black, abrasion resistant, ozone, weather conditions. Additionally reinforced with textile inserts.

Diameter: from fi 19-51 mm.

Security factor: 3:1

Temperature range of use:-30 ° C to + 80 °c

Standard: RMA STEEL mandrel

 

10 Bar Sandblasting Pipe

For the installation of sandblasting, compressed air flow with sand, metals particles and generally abrasive materials. Internal Tube NR, black, abrasive resistant, maximum 75 mm3/cm2. Outer layer SBR/NR, black, abrasion resistant, ozone, weather conditions. Reinforced with highly expansible textile inserts.

Diameter: from fi 13-51 mm.

Security factor: 3:1

Temperature range of use:-30 ° C to + 80 °c

Standard: RMA STEEL mandrel

 

Rubber pipes for mortar and concrete

 

Pipe for mortar and concrete 25/40 bar

Application for mortar and concrete pumps. Internal Tube NR, black, abrasive resistant. Outer layer NR/SBR, black, abrasion resistant, ozone, weather conditions. Additional reinforcement of highly stretgible textile inserts.

Diameter: from fi 25-40 mm.

Security factor: 3:1

Temperature range of use:-30 ° C to + 80 °c

Standard: RMA STEEL mandrel

 

Silicone Pipes

Silicone Uncut Pipe

Silicone pipe for use in food industry, laboratories, manufacture of machinery, medical technology, transport of disinfection liquids, etc. Waterproof for the smell and taste of the transported medium. Resistant to physiological solutions. Extreme strength and resilience to temperature, ozone and UV rays. Possible delivery of reinforced silicone pipes.

Security factor: 3:1

Temperature range of use:-60 ° C to 200 °c, short lasting up to + 250 °c.

Standard: RMA STEEL mandrel

 

 

 Pdf Catalog 

Ask or request a quote

Tehnoguma ZAGREB + 385 (0) 1 2499 515

Tehnoguma SPLIT + 385 (0) 21 772 150

Tehnoguma BEOGRAD + 381 (0) 11 630 47 65

Euroguma SARAJEVO + 387 (0) 33 776 350

Send inquiry for rubber hoses

Consent

Contact us with confidence!

We manufacture products according to your specific needs and specifications

Tehnoguma d.o.o

Obrtnička 1, CMP Savica Šanci, 10000 Zagreb
OIB: 38867318377
Registarski sud: Trgovački sud u Zagrebu
Datum osnivanja: 16.9. 1993.
Matični broj (MB): 00474398
Uprava: Osmo Čeljo, Nedžad Husetović, Irfan Omićević
Temeljni kapital: 2.528.100,00 kuna uplaćen u cjelosti
Erste&Steiermarkische bank d.d.
IBAN: HR3324020061100055967
SWIFT: ESBCHR22

Contact

Zagreb
+ 385 (0)1 2499 515
tehnoguma@tehnoguma-zg.hr
Split
+ 385 (0) 21 661 141
split@tehnoguma-zg.hr

Legal

Terms and conditions
Privacy policy

Ask for a call

*By submitting the above form, you agree that your data is being stored in a temporary base and used for the purposes of improving sales

Follow us

Obavijest u vezi COVID-19 (“Koronavirus”)

Poštovani kupci, zbog novonastale situacije, molimo vas da odgodite osobni dolazak u prostorije Tehnogume d.o.o. te vas pozivamo da nam zahtjeve za ponude i upite šaljete isključivo putem emaila ili nas kontaktirate telefonski. Naše prodajno osoblje biti će vam na usluzi za sve upite oko prodajnog programa, tehničkih specifikacija i ponuda.  
Holler Box